|
|
|
|
| |
| Flanging tool |
Make your own flanges on PTFE tubing |
|
Flanging tool IC 0043
Make your own sealing flanges for proper tubing connections.
- incl. 1 heating tip each for tubing ID 0.3 mm, 0.5 mm, 0.8 mm
and 1.5 mm
- Mains connection:
100 – 230 VAC / 50 – 60 Hz
Working principle :
The tubing is held in the tube holder while it is pushed over the heating tip of the flanging tool. Once the tubing tip is heated, it is pushed towards the base-plate for cooling down.
|
| Ordering information |
Order No. |
| Flanging tool |
IC 0043 |
| Tube holder |
IC 0044 |
| |
|
| Spare tips for flanging tool |
Order No. |
| for PTFE tubing with 0.4 mm ID |
IS 1077
|
| for PTFE tubing with 0.5 and 0.8 mm ID |
IS 1076 |
| for PTFE tubing with 1.5 mm ID |
IS 1075 |
| |
|
| Dimensions and weight |
|
| Depth / Width / Height |
31 x 130 x 71 mm (1.22 x 5.12 x 2.8 inches) |
| Weight |
0.850 kg (1.87 pounds) |
|
ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers
|
