|
|
|
|
| |
| Suction Shoe Gear Pumpheads for REGLO-Z / ZS drives |
Suction shoe style model |
| Magnetically Coupled Suction Shoe Pumpheads |
All pumpheads mentioned below are supplied with B-mount
Never use a gear pump with liquid containing solids !
|
|
Pump-head 180
with B-mount |
| Pumpheads |
Z-181 |
Z-183 |
Z-183HC |
Z-186 |
Z-186P |
Z-186HC |
Z-1830 |
Z-1830 P |
| Order No. |
MI 0007 |
MI 0008 |
MI 0310 |
MI 0006 |
MI 0312 |
MI 0309 |
MI 0131 |
MI 0280 |
| Flow rate (ml/min) max. 1) |
210 |
420 |
420 |
85 |
85 |
85 |
460 |
460 |
| Flow rate (ml/min) min. 1) |
2.1 |
4.2 |
4.2 |
0.85 |
0.85 |
0.85 |
4.6 |
4.6 |
| Differential pressure max. (bar) |
2.8 |
2.8 |
2.8 |
1.4 |
2.3 |
1.4 |
5.2 |
5.2 |
| Gear material |
Graphite |
Graphite |
Graphite |
Graphite |
PEEK |
Graphite |
PPS |
PEEK |
| Seals |
PTFE |
PTFE |
PTFE |
PTFE |
PTFE |
PTFE |
PTFE |
PTFE |
| Housing |
SS316 |
SS316 |
*) Hastelloy
C276 |
SS316 |
SS316 |
*) Hastelloy
C276 |
SS316 |
SS316 |
| System pressure, max. (bar) |
21 |
21 |
21 |
21 |
21 |
21 |
22 |
22 |
| Operating temperature °C |
-46...+177 |
-46...+177 |
-46...+177 |
-46...+177 |
-46...+177 |
-46...+177 |
-46...+177 |
-46...+177 |
| Internal bypass |
No |
No |
No |
No |
No |
No |
No |
No |
| Ports (internal thread) |
1/8"-27NPT |
1/8"-27NPT |
1/8"-27NPT |
1/8"-27NPT |
1/8"-27NPT |
1/8"-27NPT |
1/8"-27NPT |
1/8"-27NPT |
| |
*) for corrosive
media |
|
*) for corrosive
media |
|
| |
Order Nos. for Spare Parts and Supplementary Parts |
| Additional parts |
|
| Tubing adaptors 2) |
AR 0001 |
AR 0001 |
AR 0001-HC |
AR 0001 |
AR 0001 |
AR 0001-HC |
AR 0001 |
AR 0001 |
| Service kit 3) |
MI 0035 |
MI 0036 |
MI 0317 |
MI 0034 |
MI 0320 |
MI 0316 |
MI 0189 |
MI 0290 |
| Magnet 4) |
MI 0065 |
MI 0065 |
MI 0065 |
MI 0065 |
MI 0065 |
MI 0065 |
MI 0065 |
MI 0065 |
Never use a gear pump system for media containing solids!
Please note:
1) Flow rate without differential pressure
2) Each pumphead requires 2 tubing adaptors (for tubing with an ID of 6.4 mm [1/4"]). Must be ordered separately.
3) The service kit provides all spare parts in case that gears and seals require replacement
4) The REGLO-Z Digital drive is supplied with the magnet mounted. These part numbers are just for spare magnets
For more information about the following terms, just click on the word
|
|
ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers
|
