Pumps
  Tubing Pumps
  Gear Pumps
  Piston Pumps
      MCP-CPF Process
      Reglo-CPF Digital
      Reglo-CPF Analog
  OEM Panel Mounted
>SUBMIT YOUR SPECS

Tubing

Accessories

Downloads

   About ISMATEC
   Technology
   What's New




Ismatec is part of the product
line of Cole-Parmer.
 

MCP-CPF Process

MCP-CPF Process
with QP Q2 pump-head

PUMP ANIMATION
> Operating Manual (PDF)
Operating panel
Ordering Information
Drive ISM 919

For pump-heads
see table below.
Interchangeable pumpheads
Choose your piston pump-head ...

Pump-
heads

Volume/rev.

Flow rates
RH 00
RH 0
RH 1
2.5 25 µl
5 50 µl
10 100 µl
0.025 to 45 ml/min
0.050 to 90 ml/min
0.1 to 180 ml/min
QP Q0
QP Q1
QP Q2
QP Q3
3.2 80 µl
12.8 320 µl
28.8 720 µl
51.2 1280 µl
0.04 to 144 ml/min
0.13 to 576 ml/min
0.29 to 1300 ml/min
0.51 to 2300 ml/min
     
 
Flow rates0.025 - 2300 ml/min (depending on the piston pump-head)
Operating panel - 7-button membrane key-pad
- LED display
Memory4 sets of operating parameters can be stored
Programming
(similar to PLC)
4 individual command sequences programmed in a PC can be stored in the pump. The user can run the programs using the pump as a stand-alone unit.
Operating modes

- pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
- adjustable stroke volume
- dispensing by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)
- piston stroke back-steps for drip-free dispensing

- reversible rotation direction

Calibrating functions - for flow rate (ml/min)
- for dispensing volume (ml)
Drive speed10.0 1800.0 rpm
Speed setting digital speed setting, (resolution 0.1 rpm)
Speed controlclosed loop control for pressure independent speed
RS232 interfaces - RS232 "in"   - for operation controlling via PC
- RS232 "out" - for cascading up to 8 pumps
Analog inputSpeed control (05 or 010V / 020 or 420mA)
Analog output Speed monitoring (010VDC or 07.2 kHz)
Digital input (TTL level)Start/Stop, rotation direction, autostart, 2 universal inputs
Digital output (PWM) 2 universal outputs
Differential pressure6.9 bar (100 psi) (depending on pump-head)
Motor type DC motor
Power consumption100 W
Power supply 100 – 230 VAC / 50 – 60 Hz
Protection ratingIP 65
Depth / Width / Height 220 x 155 x 260 mm (8 2/3" x 6 1/10" x 10 ¼") (without pump-head)
Weight6.9 kg (16 lb) (without pump-head)
Accessories - Progedit software (free download)
- Driver for "LabView" software (free download)

- Foot switch

Overview piston pump


Cole-Parmer GmbH, Futtererstr. 16, 97877 Wertheim, Germany
Tel. +49 (0)9377 92030 - Fax +49 (0)9377 1388
www.ismatec.com, sales@coleparmer.de, Inquiry form