|
|
|
|
| |
| MCP-CPF
Process |
 |
| with
QP Q3.CKC pump-head | |
| Operating
panel |
 |
| Ordering
Information |
Drive
MCP-CPF Process: | ISM
919 |
Pump-head
QP
Q3.CKC: | FMI 217 |
| |
|
Specifications
Pump-head QP Q3.CKC |
| Flow
rates |
0.51
– 2300 ml/min
*) |
| Stroke
volume |
51.2
– 1280 µl (volume per rev.) |
| Revolutions
per minute | 10.0
– 1800 rpm |
| Piston | Ceramic |
| Cylinder
case | Kynar
(Fluorocarbon – PVDF) |
| Cylinder | Ceramic |
| Flow
ports |
for
tubing, 12.7 mm (1/2") i.d. and
for PTFE tubing, 6.35 mm (1/4") o.d. |
| Max.
temperature | 100°C
/ 212°F | | Max.
diff. pressure |
1.7
bar / 25 psi @ <1600 rpm
0.5 bar / 7.25 psi @
1600 – 1800 rpm | Accessories
-
adaptors for more tubing diameters
-
software
"Progedit" (with free download)
- foot switch |
| *)
max. flow rate requires tubing with 12.7 mm
(½") i.d. |
|
| Tubing
and plumbing | Tubing
Tygon ST R-3603
- 12.7 mm (1/2") i.d. |
Order
No. SC 0505 |
PTFE
Tubing
- 4 mm (0.158") i.d.
-
6 mm (0.236") o.d
- 3.6 m (11.81 feet) long
Note:
When
using this PTFE tubing, the max. flow rate must be kept below 230 ml/min.
|
Order No. MF 0336 |
Tubing
adaptors for PTFE tubing
- 2 Kynar (PVDF) adaptors
- for
tubing with 4 mm i.d. and 6 mm o.d. | included |
| More
tubing adapters for other tubing material |
see
pump-head accessories
|
| Other
tubing formulations |
| | |
ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers
|
