|
|
|
|
| |
| REGLO-CPF
Digital |
 |
REGLO-CPF
Digital
with RH00 pump-head |
> Operating Manual (PDF) |
| Operating
panel |
 |
|
| Ordering
Information |
| Drive
ISM 321 |
|
| Interchangeable
pump-heads |
| |
| Pumpheads |
Volume/ Rev. |
Flow rates |
| RH00 |
2.5 – 25 µl |
0.1 to 45 ml/min |
| RH0 |
5 – 50 µl |
0.2 to 90 ml/min |
| RH1 |
10 – 100 µl |
0.4 to 180 ml/min |
|
| |
|
Drive specifications
| | Flow
rates |
0.1
- 180 ml/min (depending on the pump-head) |
| Operating
panel | -
6-button membrane key-pad
- LED display |
| Operating
modes | -
pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
-
adjustable stroke volume
- dispensing by volume (ml)
- dispensing
by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing
by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)
- piston stroke back-steps for
drip-free dispensing
- reversible
rotation direction | | Calibrating
function | -
for flow rate (ml/min)
- for dispensing volume (ml) |
| Flow rate
setting | digital
flow rate setting, in µl and ml | | Speed
range | 40
– 1800 rpm | | Speed
control | closed
loop control for pressure independent speed |
| RS232
interfaces | RS232
"in" - for operation controlling via PC
RS232
"out" - for cascading up to 8 pumps |
| Digital
input (TTL level) | Run/Stop,
autostart | | Analog
output | Speed monitoring (0–9 kHz) |
| Differential
pressure | max.
6.9 bar | | Motor
type | DC
motor | | Power
consumption |
50
W |
| Power supply |
100 – 230 VAC / 50 – 60 Hz |
| Protection
rating | IP
30 | | Depth
/ Width / Height | 250
x 100 x 135 mm
(9 4/5" x 4" x 5 3/10") |
| Weight | 2.1
kg (5 lb) | | Accessories |
- foot switch |
|
| |
ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers
|
