ISMATEC > Products > Tubing Pumps > Accuflow Home | Contact | Feedback
Pumps
  Tubing Pumps
      Flowmaster
      ECOLINE
      Ecofluidic
      MCP / BVP
      REGLO
      IP / IPC
      MS/CA
NEW Accuflow
  Gear Pumps
  Piston Pumps
  OEM Panel Mounted
>SUBMIT YOUR SPECS
>New Catalog
- Download ( 3.4MB)
- Printed catalog
Tubing
Accessories
Downloads
Various products
   ASA-AROMA
   Flanging tool
   Pipette Plugger
Information
   About ISMATEC
   Find Distributor
   Technology
   Trade Fairs
   What's New
 
Cordless fluid transfer
Simple battery driven peristaltic pumps for field applications
Accuflow_1
Accuflow 25
  • Flow rate max. 2.5 liters/min
  • Suction lift 8 m (26 feet)
  • For elevated viscosity
    		•
    Specifications  
    Flowrate, max. 2.5 liters/min at max. 1400 rpm *
    Capacity with one charged battery ca. 35 liters
    Pump rollers 3
    Pump-head materials Housing PPS / Rotor Stainless Steel
    Tubing ID (inner diameter)
    4.8 and 6.4 mm Link to tubing
    Tubing WT (wall thickness) 2.4 mm
    Weight 2.6 kg (complete pump)
      * with water (+ 21°C), no differential pressure
       
    Ordering information  
    Accuflow up to 2.5 Liters/min, incl.: – Power pack: 2 batteries incl. battery charger 230 Volt
      – Pump-head
    Order No . ISM 1148
    Accuflow_2
    Accuflow 34
  • Flow rate max. 3.4 liters/min
  • Suction lift 3.5 m (11.5 feet)
    • Specifications  
    Flow rate, max. 3.4 liters/min at max. 1400 rpm *
    Capacity with one charged battery ca. 45 liters
    Pump rollers 3
    Pump-head materials Housing PP / Rotor mild steel
    Tubing ID
    0.8 to 8.0 mm Link to tubing
    Tubing WT 1.6 mm
    Weight 2.7 kg (complete pump)
      * with water (+ 21°C), no differential pressure
       
    Ordering information  
    Accuflow up to 2.5 Liters/min, incl.: – Power pack: 2 batteries incl. battery charger 230 Volt
      – Pump-head
    Order No. ISM 1149
    Accuflow_1
    Accuflow 40
  • Flow rate max. 4 liters/min
  • Suction lift 8 m (26 feet)
    • Specifications  
    Flow rate, max. 4 liters/min at max. 1400 rpm *
    Capacity with one charged battery ca. 55 liters
    Pump rollers 4
    Pump-head materials Housing PPS / Rotor Stainless Steel
    Tubing ID
    4.8 to 9.5 mm Link to tubing
    Tubing WT 2.4 mm
    Weight 2.7 kg (complete pump)
      * with water (+ 21°C), no differential pressure
       
    Ordering information  
    Accuflow up to 4 liters/min, incl.: – Power pack: 2 batteries incl. battery charger 230 Volt
      – Pump-head
    Order No. ISM 1154
    Accuflow_drive
    Accuflow Drive
  • with mounting plate
  • without pump-head
    • Specifications for Drive  
    Voltage 12 Volt
    No load speed 1st gear 0–450 rpm / 2nd gear 0–1400 rpm
    Speed control Continuously variable speed electronic with motor break
    Max. torque 45 Nm
    Power pack NiCd 2.4 Ah
    Battery charger 230 Volt (Standard), 12 Volt option (for cars)
    Charging time approx. 60 Min.
    Charging cycles up to 1800 cycles
       
    Ordering information  
    Accuflow drive: – Drive incl. 2 batteries and charger for 230 Volt
      – with mounting plate for pump-head
      – without pump-head
    Order No. ISM 1150
    .  
    Modifictions are subject to change.
    IS 10779   IS 10780
    Suction tubing weight    
    Serves as plumb weight and is attached to the suction end of the tubing.
    Order No. IS 10779 IS 10780
    Material Stainless steel V4A Stainless steel V4A
    Weight 350 g / 0.77 lbs 132 g / 0.29 lbs
    Tubing nipple OD 7.3 - 9.3 mm / 0.29 - 0.37" 7.3 - 9.3 mm / 0.29 - 0.37"
    Total height 70 mm / 2.75" 150 mm / 5.9"
    Suction holes:Height from bottom 30 mm / 1.18" 113 mm / 4.45"
    Diameter, max. 45 mm / 1.77" 14 mm / 0.55"
    .    

    ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
    www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers