ISMATEC > Products > Tubing Pumps > ECOLINE   Home | Contact | Feedback

Pumps   Tubing Pumps       Flowmaster       ECOLINE       MCP / BVP       REGLO       IP / IPC       MS/CA   Gear Pumps   Piston Pumps   OEM Panel Mounted >SUBMIT YOUR SPECS Tubing Accessories Downloads Information    About ISMATEC    Technology    Tradeshows    What's New Ismatec is part of the product line of Cole-Parmer.

ECOLINE VC-280/281 Microprocessor controlled tubing pump Characteristics - high-flow tubing pump for accurate and   reproducible fluid transfer in laboratories and   industry - rugged stainless steel housing - accurate and reproducible speed-setting - closed loop control for pressure independent   speed - interchangeable rotor for lower pulsation or   elevated differential pressure - analog interface Flow rates 1.7 – 5400 ml/min Channels 1 Speed setting 2-digit potentiometer, 1–99% Rotor and tube-bed - 2 stainless steel rollers - tube-bed with translucent protection cover Remote control analog interface ECOLINE VC-380 Microprocessor controlled tubing pump .. Same as VC-280 but Characteristics - 3 rollers providing lower pulsation - slightly lower maximum flow rate Flow rates 1.6 – 5000 ml/min ECOLINE VC-360 Microprocessor controlled tubing pump .. Same as VC-280 but Characteristics - 3 rollers providing lower pulsation - reduced flow rate due to smaller tube sizes - hinged tube-bed with wide opening angle allowing   rapid tube change-over - no interchangeable rotor Flow rates 0.25 – 1300 ml/min ECOLINE VC-Easy-Load Microprocessor controlled tubing pump .. Same as VC-280 but Characteristics - 3 rollers - Easily accessible pump-head - Allows rapid tube change-over - PSF housing (Polysulfone) - stainless steel rotor Flow rates 0.23– 1600 ml/min ECOLINE VC-MS/CA8-6 Microprocessor controlled tubing pump ... Same as VC-280 but Characteristics - 8-channel pump-head - Click'n'go cassettes providing defined and   reproducible occlusion conditions - 6 rollers for low pulsation - takes 3-stop collared tubing - no interchangeable rotor - no safety cutout Flow rates 0.005– 150 ml/min (per channel) ECOLINE VC-MS/CA4-12 Microprocessor controlled tubing pump ... Same as VC-280 but Characteristics - 4-channel pump-head - Click'n'go cassettes providing defined and   reproducible occlusion conditions - 12 rollers for low pulsation - takes 3-stop collared tubing - no interchangeable rotor - no safety cutout Flow rates 0.003– 83 ml/min (per channel) Cole-Parmer GmbH, Futtererstr. 16, 97877 Wertheim, Germany Tel. +49 (0)9377 92030 - Fax +49 (0)9377 1388 www.ismatec.com, sales@coleparmer.de, Inquiry form