Pumps
  Tubing Pumps
      Flowmaster
      ECOLINE
      MCP / BVP
      REGLO
      IP / IPC
      MS/CA
  Gear Pumps
  Piston Pumps
  OEM Panel Mounted
>SUBMIT YOUR SPECS

Tubing

Accessories

Downloads

   About ISMATEC
   Technology
   What's New




Ismatec is part of the product
line of Cole-Parmer.
 
IP and IP-N
IP 16

> Operating Manual (PDF)
..
Model Order No. Channels Flow rates
ml/ min
per channel

Dimensions

Weight
D x W x H (mm) D x W x H (inches) kg lb
IP 4 ISM 940 4 0.002 – 44 180 x 175 x 130 7 1/16 x 6 7/8 x 5 1/8 4.6 10
IP 8 ISM 941 8 220 x 175 x 130 8 2/3 x 6 7/8 x 5 1/8 5.1 12
IP 12 ISM 942 12 260 x 175 x 130 10¼ x 6 7/8 x 5 1/8 5.8 13
IP 16 ISM 943 16 300 x 175 x 130 11 7/8 x 6 7/8 x 5 1/8 6.5 15
IP 24 ISM 944 24 380 x 175 x 130 15 x 6 7/8 x 5 1/8 7.9 18
 
IP-N 4 ISM 945 4 0.0004 – 11180 x 175 x 130 7 1/16 x 6 7/8 x 5 1/8 4.6 10
IP-N 8 ISM 946 8 220 x 175 x 130 8 2/3 x 6 7/8 x 5 1/8 5.1 12
IP-N 12 ISM 947 12 260 x 175 x 130 10¼ x 6 7/8 x 5 1/8 5.8 13
IP-N 16 ISM 948 16 300 x 175 x 130 11 7/8 x 6 7/8 x 5 1/8 6.5 15
IP-N 24 ISM 949 24 380 x 175 x 130 15 x 6 7/8 x 5 1/8 7.9 18

4 channels
IP 4

8 channels
IP 8

12 channels
IP 12

16 channels
IP 16

24 channels
IP 24

Specifications:
Characteristics- microprocessor controlled
- planetary drive with 8 actively driven stainless steel rollers
- low pulsation
- high repeatability on all channels
- paint finished stainless steel housing
Tubing type - 2-stop color-coded tubing, 0.13 3.17 mm i.d.
Tube-bed- CA Click'n'go cassettes
- simple handling
- automatic occlusion setting
- defined and reproducible occlusion conditions
- each channel allows individual tubing selection
Operating panel- 6-button membrane key-pad
- LED display
- MAX key for fast filling or emptying the tubing system
Operating modes- pumping by speed (rpm)
- stand-by mode — prevents tubing system from drying out
- reversible rotation direction
Rotor speed- 0.4 45.0 rpm (IP)
- 0.11 11.25 rpm (IP-N)
Speed setting - in rpm, resolution 0.1 rpm (IP) or 0.03 rpm (IP-N)
- in %, resolution
0.1% (rpm)
Speed controlclosed loop control for load independent speed
Analog inputSpeed control (05 or 010V / 020 or 420mA)
Analog outputSpeed monitoring (010VDC)
Digital inputs (TTL level)Run/Stop, rotation direction, autostart
Differential pressure 1.0 bar (14.5 psi) possible (depending on tubing material);
small tubing diameters and/or cassettes with pressure lever allow higher pressures
Motor typeDC motor
Power consumption  30 W
Power supply       115/230VAC; 50/60Hz
Protection ratingIP 30
Dimensions/Weightsee table above
Accessories - cassettes
- foot switch
   

Overview IP/IPC series


Cole-Parmer GmbH, Futtererstr. 16, 97877 Wertheim, Germany
Tel. +49 (0)9377 92030 - Fax +49 (0)9377 1388
www.ismatec.com, sales@coleparmer.de, Inquiry form