|
|
|
|
| |
| IPC
and IPC-N |
IPC 8 |
|
| Microprocessor
controlled dispensing pump |
| Characteristics |
-
microprocessor controlled drive
- 11 operating
modes and calibrating functions
- extremely low pulsation
- for
low-flow, multi-channel fluid transfer and
dosing or
filling applications
- flow rate and dispensing volume can be calibrated
- planetary
drive for very accurate pumping
- high repeatability on
all channels
- 8 actively driven stainless steel rollers
- CA
Click'n'go cassettes providing
defined and repeatable occlusion conditions
- remote controllable via PC (RS232)
- paint finished stainless steel housing |
| Flow
rates |
-
0.0004 – 11 ml/min (per channel) (IPC-N Series)
- 0.002 – 44 ml/min (per channel) (IPC Series) |
| Channels |
-
4, 8, 12, 16 or 24 |
| Operating
panel |
-
6-button membrane key-pad with LED display
- various operating
modes for dosing applications | | Speed
setting |
-
in %, resolution 0.1%
(rpm)
- in µl/min or ml/min (flow rate)
|
| Speed
control |
-
closed loop control for load independent speed |
| Remote
control |
-
RS232 "in" and "out"
- digital inputs (TTL level)
- analog input for speed control
- analog output for speed monitoring
|
|
| IP
and IP-N |
IP 16 |
|
| Microprocessor
controlled delivery pump |
| ... |
Same
as IPC and IPC-N but |
| Characteristics |
-
no dispensing features
- no calibrating
functions
- only Run/Stop, Speed Control and Direction |
| Flow
rates |
-
0.0004 – 11 ml/min (per channel) (IP-N Series)
- 0.002 – 44 ml/min (per channel) (IP Series) |
| Channels |
-
4, 8, 12, 16 or 24 |
| Operating
panel |
-
6-button membrane key-pad with LED display
- 2 LEDs indicating LOCAL
and REMOTE operation | | Speed
setting |
-
in rpm, resolution 0.1 rpm (IP) or
0.03 rpm (IP-N)
- in %, resolution 0.1%
(rpm) |
| Remote
control |
-
analog interface (no RS232) |
| |
| | |
Cole-Parmer GmbH, Futtererstr. 16, 97877 Wertheim, Germany
Tel. +49 (0)9377 92030 - Fax +49 (0)9377 1388
www.ismatec.com, sales@coleparmer.de, Inquiry form
|
