Pumps
  Tubing Pumps
      Flowmaster
      ECOLINE
      MCP / BVP
      REGLO
      IP / IPC
      MS/CA
  Gear Pumps
  Piston Pumps
  OEM Panel Mounted
>SUBMIT YOUR SPECS

Tubing

Accessories

Downloads

   About ISMATEC
   Technology
   What's New




Ismatec is part of the product
line of Cole-Parmer.
 
IP and IPC pump series
Select the tubing i.d. according to the required flow rate

ipc12mit.jpg (13910 Byte)
IPC

Flow rates
IP and IPC

ml/min per channel
min.max.
0.0020.15
0.0030.26
0.0050.41
0.0090.86
0.0111.1
0.0151.5
0.0191.9
0.0232.3
0.0323.2
0.0444.4
0.0494.9
0.0575.7
0.0646.4
0.0707.0
0.0797.9
0.0898.9
0.1111
0.1212
0.1414
0.1515
0.1717
0.2121
0.2525
0.3030
0.3535
0.4444
   
Flow rates
IP-N and IPC-N

ml/min per channel
min.max.
0.00040.039
0.00070.066
0.0010.10
0.0030.22
0.0030.28
0.0040.38
0.0050.46
0.0060.58
0.0090.81
0.0111.1
0.0121.2
0.0141.4
0.0161.6
0.0171.7
0.0202.0
0.0222.2
0.0262.6
0.0303.0
0.0353.5
0.0393.9
0.0434.3
0.0525.2
0.0626.2
0.0757.5
0.0888.8
0.1111
   

i.d. mm

0.13
0.19
0.25
0.38
0.44
0.51
0.57
0.64
0.76
0.89
0.95
1.02
1.09
1.14
1.22
1.30
1.42
1.52
1.65
1.75
1.85
2.06
2.29
2.54
2.79
3.17
 
Above mentioned flow rates are approximate values, determined with water, at 22° C (72° F), without differential pressure, with Tygon® tubing.


Cole-Parmer GmbH, Futtererstr. 16, 97877 Wertheim, Germany
Tel. +49 (0)9377 92030 - Fax +49 (0)9377 1388
www.ismatec.com, sales@coleparmer.de, Inquiry form