ISMATEC > Products > Tubing Pumps > MCP / BVP > BVP Standard   Home | Contact | Feedback
Pumps
  Tubing Pumps
      Flowmaster
      ECOLINE
      Ecofluidic
      MCP / BVP
      REGLO
      IP / IPC
      MS/CA
NEW Accuflow
  Gear Pumps
  Piston Pumps
  OEM Panel Mounted
>SUBMIT YOUR SPECS
>New Catalog
- Download ( 3.4MB)
- Printed catalog
Tubing
Accessories
Downloads
Various products
   ASA-AROMA
   Flanging tool
   Pipette Plugger
Information
   About ISMATEC
   Find Distributor
   Technology
   Trade Fairs
   What's New
 
BVP Standard
BVP-Standard (drive)
Drive without pump-head
Operating panel
Operating panel BVP-Standard

> Operating Manual (PDF)
Ordering Information
Order No. for this drive
ISM 444
Interchangeable pump-heads
Click one of the buttons and choose your pump-head ...
Link to single-channel pump-heads
Link to multi-channel pump-heads
Flow rates < 0.003 – 3700 ml/min (depending on mounted pump-head)
Channels 1 – 24 (depending on mounted pump-head)
Speed 2.4 – 240 rpm
Speed setting 1-99.9%, resolution 0.1%, 3-digit potentiometer
Speed controlClosed loop control for pressure independent speed
Analog inputSpeed control (0–5 or 0–10V / 0–20 or 4–20mA)
Analog outputSpeed monitoring (0–10VDC or 0–12 kHz)
Digital input (TTL level)Start/Stop, rotation direction
Differential pressure 1.5 bar (21.7 psi) possible (depending on pump-head and tubing material); small tubing diameters may allow higher pressures
Motor typeDC motor
Power consumption max. 100 W
Power supply 115/230VAC; 50/60Hz
Protection ratingIP 30
Depth / Width / Height220 x 155 x 260 mm (8 2/3" x 6 1/10" x 10¼")  (without pump-head)
Weight5.7 kg (13 lb) (without pump-head)
Accessories- foot switch
   

Overview MCP/BVP pump series

ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers