|
|
|
|
| |
| | |
|
Pump-head models 360, 380
and 380AD |
| |
Model
Order No |
Characteristics |
Flow rates
ml/min |
Rollers |
Differential
pressure * |
Tubing |
 |
360
ISM 719 |
- easily accessible pump-head
- hinged tube-bed allows rapid
tube change-over
- transparent protection cover provides
safety and allows monitoring the
pump-head in operation
- self-centering tube-track, allows tube
to lie in the optimum position, which
considerably lengthens the tube-life
- stainless steel rollers |
0.072 – 880 |
3 |
1.5 bar
(21.7 psi) |
Standard tubing
i.d. 0.8 – 6.4 mm
(1/32 – 1/4")
Wall 1.6 mm
(1/16") |
 |
380
ISM 718 |
- same as model 360, but
- larger pump-head
- takes tubing with larger i.d.
- provides higher flow rates
- ideal for sterile media |
0.44 – 2800 |
3 |
1.5 bar
(21.7 psi) |
Standard tubing
i.d. 1.6 – 9.5 mm
(1/16 – 3/8")
Wall 1.6 mm
(1/16") |
 |
380AD
ISM 725 |
- accepts tubing with 0.8, 1.6 and 2.4 mm
wall thickness
- stainless steel rollers
- pressure on tubing adjustable via rollers
- with 2.4 mm wall thickness ideal for
media with high viscosity,
or with a certain level of solid content. |
0.41 – 3600 |
3 |
1.5 bar
(21.7 psi)
or
2.5 bar
(36.2 psi) |
Standard tubing
i.d. 1.6 – 11.1 mm
(1/16 – 7/16")
Wall 1.6 mm
(1/16")
i.d. 4.8 + 6.4 mm
(3/16 + 1/4")
Wall 2.4 mm
(3/32") |
|
* The
differential pressures stated above are possible,
but they also depend on the tubing material used.
Small tubing
diameters may allow higher pressures.
| |
| Overview
single-channel pump-heads |
ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers
|
