| Flow
rates |
<
0.001 – 3700 ml/min (depending on mounted pump-head) |
| Channels |
1
– 24 (depending on mounted pump-head) |
| Operating
panel | -
7-button membrane key-pad
- LED display |
| Memory | 4
sets of operating parameters can be stored |
| Operating
modes | -
pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
-
factory-set flow rates for all available tube sizes
- dispensing
by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing
by volume within a pre-set time
- interval dispensing by volume
with a pause
- interval dispensing by time with a pause
- setting
the number of dispensing cycles
- pause time setting (from 0.1s up
to 999hrs)
- roller back-steps for drip-free dispensing
- reversible rotation direction |
| Calibrating
function | -
for flow rate (ml/min)
- for dispensing volume (ml) |
| Speed |
1
– 240 rpm |
| Speed
setting |
rpm,
resolution 0.1 rpm |
| Speed
control | closed
loop control for pressure independent speed |
| RS232
interfaces | -
RS232 "in" - for operation controlling via PC
- RS232
"out" - for cascading up to 8 pumps |
| Analog
input | Speed
control (0–5 or 0–10V / 0–20
or 4–20mA) |
| Analog
output | Speed monitoring (0–10VDC or 0–12 kHz) |
| Digital
input | Start/Stop,
rotation direction, autostart |
| Differential
pressure |
1.5
bar (21.7 psi) possible (depending on pump-head
and tubing material); small tubing diameters may allow higher pressures |
| Motor
type | DC
motor |
| Power
consumption |
100
W |
| Power supply |
115/230VAC;
50/60Hz |
| Protection
rating | IP
30 |
| Depth
/ Width / Height | 220
x 155 x 260 mm (8 2/3" x 6 1/10" x 10 ¼") (without pump-head) |
| Weight | 6.4
kg (14 lb) (without pump-head) |
| Accessories |
- Driver for "LabView" software (free download)
- Foot
switch |
