Pumps
  Tubing Pumps
      Flowmaster
      ECOLINE
      MCP / BVP
      REGLO
      IP / IPC
      MS/CA
  Gear Pumps
  Piston Pumps
  OEM Panel Mounted
>SUBMIT YOUR SPECS

Tubing

Accessories

Downloads

   About ISMATEC
   Technology
   What's New




Ismatec is part of the product
line of Cole-Parmer.
 
MCP-Process (drive)
MCP Process
Order No. ISM 915
MCP-Standard (drive)
MCP Standard
Order No. ISM 404
BVP-Process (drive)
BVP Process
Order No. ISM 920
BVP-Standard (drive)
BVP Standard
Order No. ISM 444

Choose your pump-head from the table below.

MS/CA pumpheads

  Model
Bestell-Nr.
Channels Characteristics Flow rates
ml/min per channel
Rollers Differential
pressure
*
Tubing
MS/CA 8-6, 8 channels

MS/CA 8-6
ISM 724

8 - ideal pump-head for multi-channel
  auto-sampling processes
- MS/CA Click'n'go cassettes
  guarantee easy and rapid tube
  change-over
- number of channels can be
  increased by 1 or 2 additional
  extension blocks (ISM 185)
0.002 – 100 6 1.0 bar
(14.5 psi)

3-stop
color-coded tubing

i.d. 0.13 3.17 mm

MS/CA 8-6, 16 channels MS/CA 8-6
ISM 724
plus
1 x ISM 185
16 extended to 16 channels by
1 extension block (ISM 185)
MS/CA 8-6, 24 channels MS/CA 8-6
ISM 724
plus
2 x ISM 185
24 extended to 24 channels by
2 extension blocks (ISM 185)
 
MS/CA 4-12, 4 channels MS/CA 4-12
ISM 735
4 - same pump-head as MS/CA 8-6 but
- 12 rollers for extremely low pulsation
- blocks of 4 channels
- number of channels can be
  increased by 1, 2 or 3 additional
  extension blocks (ISM 737)
0.001 – 57 12 1.0 bar
(14.5 psi)
3-stop
color-coded tubing

i.d. 0.13 3.17 mm




kopf_ms-ca_4-12_8.jpg (5980 Byte) MS/CA 4-12
ISM 735
plus
1 x ISM 737
8 extended to 8 channels by
1 extension block (ISM 737)
ms-ca12-12.jpg (3892 Byte) MS/CA 4-12
ISM 735
plus
2 x ISM 737
12 extended to 12 channels by
2 extension blocks (ISM 737)
MS/CA 4-12, 16 channels MS/CA 4-12
ISM 735
plus
3 x ISM 737
16 extended to 16 channels by
3 extension blocks (ISM 737)

* The differential pressures stated above are possible, but they also depend on the tubing material used.
S
mall tubing diameters and/or cassettes with pressure lever may allow higher pressures.

Overview multi-channel pump-heads


Cole-Parmer GmbH, Futtererstr. 16, 97877 Wertheim, Germany
Tel. +49 (0)9377 92030 - Fax +49 (0)9377 1388
www.ismatec.com, sales@coleparmer.de, Inquiry form