ISMATEC > Products > Tubing Pumps > MCP / BVP > Single Channel Pump Heads > Pro Series    Home | Contact | Feedback
Pumps
  Tubing Pumps
      Flowmaster
      ECOLINE
      Ecofluidic
      MCP / BVP
      REGLO
      IP / IPC
      MS/CA
NEW Accuflow
  Gear Pumps
  Piston Pumps
  OEM Panel Mounted
>SUBMIT YOUR SPECS
>New Catalog
- Download ( 3.4MB)
- Printed catalog
Tubing
Accessories
Downloads
Various products
   ASA-AROMA
   Flanging tool
   Pipette Plugger
Information
   About ISMATEC
   Find Distributor
   Technology
   Trade Fairs
   What's New
 
MCP-Process (drive)
MCP Process
Order No. ISM 915		 MCP-Standard (drive)
MCP Standard
Order No. ISM 404		 BVP-Process (drive)
BVP Process
Order No. ISM 920		 BVP-Standard (drive)
BVP Standard
Order No. ISM 444

Choose your pump-head from the table below.

Models Pro-280/281 and Pro-380/381

  Model
Order No		 Characteristics Flow rates
ml/min		 Rollers Differential
pressure *		 Tubing
Pro 280

Pro-280
ISM 785

- coated aluminum pump-head
- can be dismantled for cleaning
- stainless steel rollers
- self-centering tube-track, allows tube
  to lie in the optimum position, which
  considerably lengthens the tube-life
- for applications which require hygienic
  conditions, reliability and durability
- ideal for use in chemical, biotechno-
  logical and pharmaceutical processes
  and in food industry		 0.49 – 3700 2 1.5 bar
(21.7 psi)

Standard tubing
i.d. 1.6 – 11.1 mm
(1/16 – 7/16")
Wall 1.6 mm
(1/16")

Pro 280 Pro-281
ISM 793		 - same as Pro-280 but
- for tubing with 2.4 mm wall thickness
- especially recommended for:
  - elevated differential pressures
  - viscous fluids		 3.6 – 3100 2 2.5 bar
(36.2 psi)		 Standard tubing
i.d. 4.8 – 9.5 mm
(3/16 – 3/8")
Wall 2.4 mm
(3/32")
Pro 380 Pro-380
ISM 791		 - same as Pro-280 but
- less pulsation thanks to 3 rollers
- slightly lower flow rate		 0.45 – 3400 3 1.5 bar
(21.7 psi)		 Standard tubing
i.d. 1.6 – 11.1 mm
(1/16 – 7/16")
Wall 1.6 mm
(1/16")
Pro 380 Pro-381
ISM 797		 - same as Pro-380 but
- for tubing with 2.4 mm wall thickness
- especially recommended for:
  - elevated differential pressures
  - viscous fluids		 3.3 – 2900 3 2.5 bar
(36.2 psi)		 Standard tubing
i.d. 4.8 – 9.5 mm
(3/16 – 3/8")
Wall 2.4 mm
(3/32")

* The differential pressures stated above are possible, but they also depend on the tubing material used.
Small tubing diameters may allow higher pressures.

Overview single-channel pump-heads

ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers