Pumps
  Tubing Pumps
      Flowmaster
      ECOLINE
      MCP / BVP
      REGLO
      IP / IPC
      MS/CA
  Gear Pumps
  Piston Pumps
  OEM Panel Mounted
>SUBMIT YOUR SPECS

Tubing

Accessories

Downloads

   About ISMATEC
   Technology
   What's New




Ismatec is part of the product
line of Cole-Parmer.
 
CA pump-heads
Select the tubing i.d. according to the required flow rate

ca4.jpg (3355 Byte)
CA 4
4 channels
ISM 721

ca8.jpg (3949 Byte)
CA 8
8 channels
ISM 732

ca12.jpg (3643 Byte)
CA 12
12 channels
ISM 733

Flow rates
ml/min per channel
min.max.
0.002 0.31
0.0040.94
0.008 1.8
0.0194.5
0.025 6.1
0.0348.2
0.042 10
0.05313
0.074 18
0.1024
0.11 27
0.1331
0.14 35
0.1638
0.18 42
0.2047
0.23 55
0.2662
0.30 71
0.3378
0.36 86
0.43100
0.51 120
0.62150
0.74 180
0.94230

2-stop
color-coded tubing

i.d. mm

0.13
0.19
0.25
0.38
0.44
0.51
0.57
0.64
0.76
0.89
0.95
1.02
1.09
1.14
1.22
1.30
1.42
1.52
1.65
1.75
1.85
2.06
2.29
2.54
2.79
3.17
For BVP-Standard drive, the min. flow rate values must be multiplied by factor 2.4
Above mentioned flow rates are approximate values, determined with water, at 22° C (72° F), without differential pressure, with Tygon® tubing.


Cole-Parmer GmbH, Futtererstr. 16, 97877 Wertheim, Germany
Tel. +49 (0)9377 92030 - Fax +49 (0)9377 1388
www.ismatec.com, sales@coleparmer.de, Inquiry form