|
|
|
|
| |
| Easy-Load®
pump-heads
Select the tubing i.d. according to the required flow rate |
Easy-Load
MF 0313
plus
ISM 738 |
| 0.066 | 16 |
| 0.25 | 59 |
| 0.91 | 220 |
| 1.9 | 450 |
| 3.1 | 730 |
| 4.7 | 1100 |
| |
|
|
| 0.8 | 1/32 |
| 1.6 | 1/16 |
| 3.2 | 1/8 |
| 4.8 | 3/16 |
| 6.4 | 1/4 |
| 8.0 | 5/16 |
| |
|
|
| For
BVP-Standard drive, the min. flow rate values must be multiplied by factor 2.4 |
Easy-Load II
MF 0446
plus
ISM 738 |
| 0.24 | 58 |
| 0.92 | 220 |
| 1.9 | 460 |
| 3.0 | 730 |
| 4.2 | 1000 |
|
| 1.6 | 1/16 |
| 3.2 | 1/8 |
| 4.8 | 3/16 |
| 6.4 | 1/4 |
| 8.0 | 5/16 |
|
| For
BVP-Standard drive, the min. flow rate values must be multiplied by factor 2.4 |
|
| Above
mentioned flow rates are approximate values, determined with water, at 22° C (72° F), without differential pressure, with Tygon® tubing. |
| |
ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers
|
