Pumps
  Tubing Pumps
      Flowmaster
      ECOLINE
      MCP / BVP
      REGLO
      IP / IPC
      MS/CA
  Gear Pumps
  Piston Pumps
  OEM Panel Mounted
>SUBMIT YOUR SPECS

Tubing

Accessories

Downloads

   About ISMATEC
   Technology
   What's New




Ismatec is part of the product
line of Cole-Parmer.
 

Pump-head MS/CA 4-12
Select the tubing i.d. according to the required flow rate

ms-ca4-12.jpg (3787 Byte)
MS/CA 4-12
4 channels
ISM 735

kopf_ms-ca_4-12_8.jpg (5980 Byte)
MS/CA 4-12
8 channels
ISM 735
plus
1 x ISM 737

ms-ca12-12.jpg (3892 Byte)
MS/CA 4-12
12 channels
ISM 735
plus
2 x ISM 737

ms-ca16-12.jpg (3746 Byte)
MS/CA 4-12
16 channels
ISM 735
plus
3 x ISM 737

Flow-rates
ml/min per channel
min.max.
0.0010.22
0.0030.51
0.0040.91
0.0092.1
0.0122.8
0.0163.8
0.0194.7
0.0245.8
0.0338.0
0.04411
0.05012
0.05613
0.06315
0.06716
0.07518
0.08320
0.09423
0.1025
0.1228
0.1330
0.1332
0.1537
0.1741
0.1946
0.2152
0.2457
   
For BVP-Standard drive, the min. flow rate values must be multiplied by factor 2.4

3-stop
color-coded tubing

i.d. mm

0.13
0.19
0.25
0.38
0.44
0.51
0.57
0.64
0.76
0.89
0.95
1.02
1.09
1.14
1.22
1.30
1.42
1.52
1.65
1.75
1.85
2.06
2.29
2.54
2.79
3.17
 
Above mentioned flow rates are approximate values, determined with water, at 22° C (72° F), without differential pressure, with Tygon® tubing.


Cole-Parmer GmbH, Futtererstr. 16, 97877 Wertheim, Germany
Tel. +49 (0)9377 92030 - Fax +49 (0)9377 1388
www.ismatec.com, sales@coleparmer.de, Inquiry form