Pumps
  Tubing Pumps
      Flowmaster
      ECOLINE
      MCP / BVP
      REGLO
      IP / IPC
      MS/CA
  Gear Pumps
  Piston Pumps
  OEM Panel Mounted
>SUBMIT YOUR SPECS

Tubing

Accessories

Downloads

   About ISMATEC
   Technology
   What's New




Ismatec is part of the product
line of Cole-Parmer.
 
Pump-head MS/CA 8-6
Select the tubing i.d. according to the required flow rate

ms-ca8-6.jpg (3078 Byte)

MS/CA 8-6
8 channels
ISM 724

ms-ca16-6.jpg (3350 Byte)


MS/CA 8-6
16 channels
ISM 724
plus
1 x ISM 185

ms-ca24-6.jpg (3616 Byte)

MS/CA 8-6
24 channels
ISM 724
plus
2 x ISM 185

Flow rates
ml/min per channel
min.max.
0.0020.33
0.0030.67
0.0051.1
0.0112.6
0.0143.5
0.0194.6
0.0245.7
0.0307.2
0.04210
0.05714
0.06415
0.07318
0.08320
0.09022
0.1024
0.1127
0.1332
0.1536
0.1742
0.1946
0.2150
0.2559
0.2969
0.3379
0.3789
0.43100
   
For BVP-Standard drive, the min. flow rate values must be multiplied by factor 2.4
3-stop
color-coded tubing

i.d. mm

0.13
0.19
0.25
0.38
0.44
0.51
0.57
0.64
0.76
0.89
0.95
1.02
1.09
1.14
1.22
1.30
1.42
1.52
1.65
1.75
1.85
2.06
2.29
2.54
2.79
3.17
 

Above mentioned flow rates are approximate values, determined with water, at 22° C (72° F), without differential pressure, with Tygon® tubing.


Cole-Parmer GmbH, Futtererstr. 16, 97877 Wertheim, Germany
Tel. +49 (0)9377 92030 - Fax +49 (0)9377 1388
www.ismatec.com, sales@coleparmer.de, Inquiry form