|
|
|
|
| |
| Pump-heads Pro-280 / 281
Select the tubing i.d. according to the required flow rate |
|
Pro-280
ISM 785
|
| 0.49 | 120 |
| 1.9 | 450 |
| 4.2 | 1000 |
| 7.2 | 1700 |
| 11 | 2600 |
| 14 | 3300 |
| 16 | 3700 |
|
| 1.6 | 1/16 |
| 3.2 | 1/8 |
| 4.8 | 3/16 |
| 6.4 | 1/4 |
| 8.0 | 5/16 |
| 9.5 | 3/8 |
| 11.1 | 7/16 |
|
| For BVP-Standard
drive, the min. flow rate values must be multiplied by factor 2.4 |
|
Pro-281
ISM 793
|
| 3.6 | 870 |
| 6.5 | 1600 |
| 9.9 | 2400 |
| 13 | 3100 |
| |
|
|
| 4.8 | 3/16 |
| 6.4 | 1/4 |
| 8.0 | 5/16 |
| 9.5 | 3/8 |
| |
|
|
|
For BVP-Standard drive, the min. flow rate values must be multiplied by factor 2.4 |
| Above
mentioned flow rates are approximate values, determined with water, at 22° C (72° F), without differential pressure, with Tygon® tubing. |
| | |
ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers
|
