|
|
|
|
| |
| Pump-heads Pro-380 / 381
Select the tubing i.d. according to the required flow rate |
Pro-380
ISM 791 |
| 0.45 | 110 |
| 1.7 | 400 |
| 3.7 | 890 |
| 6.5 | 1600 |
| 9.7 | 2300 |
| 13 | 3000 |
| 14 | 3400 |
|
| 1.6 | 1/16 |
| 3.2 | 1/8 |
| 4.8 | 3/16 |
| 6.4 | 1/4 |
| 8.0 | 5/16 |
| 9.5 | 3/8 |
| 11.1 | 7/16 |
|
| For BVP-Standard
drive, the min. flow rate values must be multiplied by factor 2.4 |
Pro-381
ISM 797 |
| 3.3 | 800 |
| 5.8 | 1400 |
| 8.8 | 2100 |
| 12 | 2900 |
| |
|
|
| 4.8 | 3/16 |
| 6.4 | 1/4 |
| 8.0 | 5/16 |
| 9.5 | 3/8 |
| |
|
|
| For BVP-Standard
drive, the min. flow rate values must be multiplied by factor 2.4 |
| Above
mentioned flow rates are approximate values, determined with water, at 22° C (72° F), without differential pressure, with Tygon® tubing. |
| | |
ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers
|
