|
|
|
|
| |
| |
| Microprocessor
controlled dispensing pump |
| Characteristics |
-
compact multi-channel tubing pump
- for low-flow, multi-channel
fluid transfer and
dosing or filling applications
- 6, 8 and 12 roller rotors for extremely low pulsation
- 6 operating modes and calibration functions
- MS/CA
Click'n'go cassettes providing defined
and
reproducible occlusion
conditions
- remote controllable via PC
(RS232) | | Flow
rates |
0.001
– 68ml/min (per channel) |
| Channels | 2
or 4 | | Motor
type | DC
motor | | Speed
control | closed
loop control for pressure independent speed |
| Speed
setting | digital
speed setting, resolution 0.1 rpm | | Operating
panal | -
6-button membrane key-pad
- LED display |
| Remote
control | -
RS232 "in" and "out"
- digital input and analog
output |
| |
|
|
| |
| .. |
Same
as REGLO Digital but |
| Characteristics | -
no LED display
- no calibration functions
- only "Start/Stop",
"Speed" and "Direction" |
| Flow rates | 0.002
– 68 ml/min (per channel) |
| Speed setting | 2-digit
potentiometer, 1% steps | | Remote
control | analog
interface (no RS232) |
| |
|
|
| |
| ... |
Same
as REGLO Digital but |
| Characteristics | -
single-channel tubing pump
- easy accessible tube-bed
- higher max. flow rate
- no LED display
- no calibration
functions
- only "Start/Stop", "Speed" and "Direction"
| | Flow
rates | 2.1
– 230 ml/min | | Channels | 1 |
| Speed
setting | 2-digit
potentiometer, 1% steps | | Remote
control | analog
interface (no RS232) | |
|
|
ISMATEC SA, Labortechnik - Analytik, Feldeggstrasse 6, 8152 Glattbrugg, Switzerland,
www.ismatec.com, sales.ismatec@idexcorp.com, Inquiry form, Phone and fax numbers
|
