Pumps
  Tubing Pumps
      Flowmaster
      ECOLINE
      MCP / BVP
      REGLO
      IP / IPC
      MS/CA
  Gear Pumps
  Piston Pumps
  OEM Panel Mounted
>SUBMIT YOUR SPECS
>New Catalog
- Download
- Printed catalog

Tubing

Accessories

Downloads

   About ISMATEC
   Find Distributor
   Technology
   What's New




Ismatec is part of the product
line of IDEX Health & Science.
For further information about
IDEX Health & Science see
www.idex-hs.com
 
REGLO Digital
Reglo Digital MS-4/8
..
Model Order No.Channels

Flow rates
ml/ min per channel

Pump
rollers
REGLO Digital MS-2/6ISM 8312 0.003 – 68 6
REGLO Digital MS-2/8ISM 8322 0.002 – 57 8
REGLO Digital MS-2/12ISM 5962 0.002 – 38 12
REGLO Digital MS-4/6ISM 8334 0.002 – 43 6
REGLO Digital MS-4/8ISM 8344 0.002 – 35 8
REGLO Digital MS-4/12ISM 5974 0.001 – 24 12
> Operating Manual (PDF)    6 rollers = higher flow rate
12 rollers = less pulsation 
Tubing type 3-stop color-coded tubing, 0.13 3.17 mm i.d. (for 2 channels)
3-stop color-coded tubing, 0.13 3.17 mm i.d. (for 4 channels)
Tube-bed MS/CA Click'n'go cassettes
- simple handling
- automatic occlusion setting
- defined and reproducible occlusion conditions
- each channel allows individual tubing selection
Operating panel- 6-button membrane key-pad
- LED display
Operating modes- pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
- factory-set flow rates for all available tube sizes
- dispensing by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)
- roller back-steps for drip-free dispensing

- reversible rotation direction
Calibrating function- for flow rate (ml/min)
- for dispensing volume (ml)
Rotor speed- 1.6 160 rpm (2-channel versions)
- 1.0 100 rpm (4-channel versions
- adjustable in steps of 0.1 rpm
Speed settingdigital speed setting
Speed controlclosed loop control for pressure independent speed
RS232 interfacesRS232 "in"    - for operation controlling via PC
RS232 "out"  - for cascading up to 8 pumps
Digital input (TTL level)Run/Stop, autostart
Analog outputSpeed monitoring (08 kHz = 2 channel version, 05 kHz = 4 channel version)
Differential pressure 1.0 bar (14.5 psi) possible (depending on tubing material);
small tubing diameters and/or cassettes with pressure lever allow higher pressures
Motor typeDC motor
Power consumption 75 W
Power supply 100 – 230 VAC / 50 – 60 Hz
Protection ratingIP 30
Depth / Width / Height178 x 100 x 135 mm (7" x 4" x 5 3/10") = 2-channel versions
190 x 100 x 135 mm (7 " x 4" x 5 3/10") = 4-channel versions
Weight2.0 kg (5 lb) (2-channel versions)
2.1 kg (5 lb) (4-channel versions)
Accessories - Cassettes
- Foot switch

- Driver for "LabView" software (free download)

Overview REGLO series


IDEX Health & Science GmbH, Futtererstr. 16, 97877 Wertheim, Germany
www.ismatec.com, CustomerService.hsEurope@idexcorp.com, Inquiry form, Phone and fax numbers